-
What to do if you don’t have hot water
Hot water is something that we all use multiple times a day for cleaning the dishes, taking a shower or bath or simply washing our hands.
It is all too easy to take this for granted until the time comes where you go to turn on the tap and freezing cold water is the only thing that comes gushing out.
No-one want to deal with central heating problems especially in the heart of winter and a complete lack of hot water can certainly be classed as a pretty significant problem.
Before you get in touch with a professional there are a few different things that you can check that might be the cause of your lack of heat and are easily fixable.
These include:
- A tripped fuse – If your boiler isn’t the only appliance not working, a trip to the fuse box may solve all your issues.
- Unlit pilot light – If your pilot light has gone out, follow the manufacturers guide on how to relight it. If this doesn’t work or the light keeps going out, call an engineer.
- Lack of Pressure – Re-pressurising your boiler may give it the boost it needs to start pumping out heat once again. Bear in mind if this is indeed the issue you will probably get some heat from your boiler even if it is not satisfactory.
- Reset Required – Yes, we really are going to suggest that you turn your boiler on and off again. Most boilers have a reset button so find it and give it a go. It might not work but if it does it will save you a lot of time and stress.
Frozen pipes
The winter is the worst possible time to be left without water but it is also one of the most common. One of the biggest reasons for this is that the freezing temperatures outside can lead to pipes being frozen and the whole system being blocked up.
If you think this might be the case, venture outside and take a look at the condensate pipe located on the exterior of the property. Pour some warm water over the pipe and see if that helps matters. If it does, consider how you could better insulate the pipe in the future.
Call a Gas Safe Engineer
If you have a gas boiler and aren’t getting any hot water, the best thing to do is to contact a Gas Safe engineer.
No matter if it is both your heating and hot water that aren’t working, or your hot water alone, these expertly trained professionals will be able to quickly diagnose the problem and hopefully fix it with as little disruption as possible.
If you are unsure where to find a Gas Safe Engineer, the Gas Safe Register is a good place to start. If your boiler is still under warranty, even better, you can simply call up your boiler installer and arrange for them to come a take a look free of charge.
-
Asbestos testing Adelaide: The Importance of Asbestos Testing
Asbestos testing is essential in order to keep your home and family safe from asbestos fibre exposure, which has been linked with serious diseases like mesothelioma, lung cancer and asbestosis (scarring on the lungs).
Any material suspected to contain asbestos should undergo MPA asbestos testing Adelaide. Samples should be collected and analysed by a certified analyst for examination.
Sampling
At asbestos testing, Virginia-licensed inspectors collect samples of suspect materials throughout a structure where ACM exists, in order to provide representative samples that will allow a laboratory to determine whether or not it is friable; nonfriable materials can remain in place during demolition or renovation projects while friable ones must be removed immediately.
Based on client needs, a sampling plan is developed. Samples are then sent to an accredited lab using Polarised Light Microscope (PLM) analysis for review against the National Priority List of asbestos-containing materials and an asbestos management plan is then created.
At all times when collecting samples, proper hygiene practices must be observed. Dust-generating tools must be wet-wiped with wet wipes and used with soapy water to wash hands; any cleanup methods which make the dust airborne should be avoided, including using vacuums; it may be advantageous to cover carpet and furniture with plastic sheeting for additional protection.
Most asbestos testing laboratories require solid or relatively solid samples of asbestos material, such as pipe insulation or coin-sized pieces of drywall, in order to properly evaluate it. Some laboratories also accept dust samples; in these instances, you’ll usually be asked to collect as much as one teaspoonful of settled dust in a sealed container and bring it in for testing.
Analysis
Asbestos is a naturally occurring mineral that poses serious health threats when dispersed into the air. Our laboratories worldwide provide microscopic analysis services, including Phase Contract Microscopy, Polarised Light Microscopy (PLM) and Transmission Electron Microscopy.
PLM testing employs microscope analysis to look for certain characteristics of asbestos fibres, including their elongation colours and polarisation. When they find one meeting these requirements, our analysts mark and record it using an approved database system such as TEAMS.
MPA asbestos testing Adelaide services allow us to determine whether materials contain asbestos and use this information in our reports, which include asbestos certificates, risk assessments and comprehensive recommendations.
When we prepare samples for laboratory analysis, we use various processes such as homogenisation, ashing and acid treatment to ensure they are ready for testing with a detection limit of less than 0.01% asbestos by mass.
When handling bulk samples of spray-applied fireproofing (TSI) or trowelled-on plasters and ceiling textures, we follow VDI 3866 part 5 Annex B 2017 06 as per standard procedures. Furthermore, for asbestos analysis in soil or water we utilise National Voluntary Laboratory Accreditation Program Method 198.8 as our method.
Reporting
While asbestos was banned from building materials in 1989, many still contain this carcinogen. When disturbed during repair, maintenance, demolition, or renovation projects that include material containing asbestos fibres become airborne and can be inhaled by those nearby; leading to serious health conditions like mesothelioma and lung cancer in susceptible individuals. Federal regulations therefore mandate an asbestos survey report before any building demolition project takes place.
Pre-demolition surveys may include asbestos testing as part of their assessment to detect friable ACM (Asbestos Containing Material). Destructive samples are collected, with asbestos-containing material tested using either polarised light microscopy or transmission electron microscopy, then recorded into an asbestos survey report.
Firms offering asbestos inspection must possess experience, licensing and adequate professional liability insurance for environmental services. In addition, examples of their past work should be available. A firm employing industrial hygienists who conduct asbestos analysis must possess both an NVLAP-accredited laboratory and state certification to conduct their asbestos analysis services.
EPA’s new asbestos reporting requirements apply to small businesses that manufacture or import chemical substances or mixtures that contain asbestos that aren’t listed under TSCA as impurities or bulk forms, so as to obtain data about these forms. Reporting will enable EPA to collect more data regarding this specific form of asbestos.
-
Adelaide SEO: SEO Trends to Watch Out For in 2023
Keep abreast of SEO trends to optimise your website in 2023, as they could change quickly. In this blog we’ll outline some major SEO developments to watch out for in 2023.
One Adelaide SEO trends to pay attention to is featured snippets. Optimising pages with these snippets can increase click-through rates and organic traffic significantly.
1. Voice Searches
Voice search is one of the fastest-growing trends in digital marketing and an essential element of SEO. Users can conduct searches hands-free without touching a keyboard; voice search can be found across devices including smartphones, tablets, computers, smart TVs, cars and home appliances.
Search is becoming a more conversational method, so marketers must use long-tail keywords that match user intent – this includes words such as who, what, when, where why and how. Furthermore, marketers should emphasise local search results since users tend to look for businesses near them.
2. Semantically Related Keywords
Semantic SEO takes into account natural language and context when ranking search results. Furthermore, latent semantic indexing (LSI) keywords help search engines better interpret search queries’ meaning and intent compared to simply using one keyword on each page on your site, which could mislead users while harming SEO efforts. This approach is more accurate than using just a single keyword per page as this could potentially mislead search engines as to their meaning and intent and negatively affect user experiences and SEO rankings.
Another Adelaide SEO trends is LSI keywords are words and phrases that deepen the subject matter of your content, helping Google better understand it and rank you higher for related searches. For instance, when someone types “marketing visuals” into Google Search they could be searching for images, tips & tricks or how-to videos.
To maximise content optimisation, utilise an LSI Graph or Moz and Ahrefs tool to generate a list of LSI keywords for your primary keywords. Also consider analysing competitors’ pages with these tools so as to find relevant phrases that you can then incorporate into your own writing to improve relevance and outrank competitors.
3. Content Marketing
Content marketing is an approach to creating and disseminating valuable content to attract potential customers. This may take the form of blog articles, infographics, video blogs, podcasts, ebooks or anything else your target market may be searching for online. By targeting relevant keywords or topics with your content you can reach those searching for those terms more easily, thus ranking higher on search engine results pages (SERPs), driving more visitors to your website.
Content marketing entails creating and disseminating material that will help your target audience solve their problems or questions. This may involve drawing upon customer data and insights, unique perspectives or viewpoints or even thought leadership within an industry to generate compelling and relevant content that builds brand recognition, trust and authority with your audience.
Keep abreast of Adelaide SEO trends to make sure that your content is optimised for search engines. Use tools like BuzzSumo to identify what is trending within your industry and use that insight to inform your own strategies. Also be sure to regularly review on-site SEO analytics to gain an idea of which pieces are performing well or need improvement.
4. Content Automation
Automated processes exist to make life simpler; whether that means an automatic mixer for speedier baking or power windows on your car. Content marketing and SEO automation follow this same principle – its goal being to remove repetitive manual tasks while freeing up marketers to focus on higher value initiatives.
Content automation not only saves businesses time and effort, but it also allows them to easily track and optimise SEO efforts more easily – helping ensure content meets Google’s algorithm updates, values, and goals.
However, it is essential to remember that content automation tools alone will not guarantee SEO success; humans still require creating engaging, relevant content to draw customers in.
5. Google Instant
Google released several algorithm updates during 2022 that had an immediate impact on SEOs and required them to adapt their strategy accordingly. As long as marketers continue creating valuable, informative content that answers user searches efficiently, they should remain competitive in SERPs.
Google Instant is an innovative search feature that shows search results as you type your query, allowing for instantaneous refinement of thoughts while saving two to five seconds per search query. As a result, it reduces spelling errors while providing users with better qualified search results.